2.2 Inserting and Deleting Clock Cycles |
|
|
|
2.2 Inserting and Deleting Clock Cycles |
|
|
2.2 Inserting and Deleting Clock Cycles |
|
|
|
2.2 Inserting and Deleting Clock Cycles |
|
|
Clock cycles can be inserted or deleted into a clock waveform, so that parameters attached to a particular clock edge will move in time.
To insert or delete cycles in a clock:
•Select a clock edge for the insertion point, or the first edge of the clock cycle to be deleted |
|
•To Insert, a press the <Insert> key or choose the Edit > Insert Clock Cycles menu. •To Delete, press the <delete> key or choose the Edit > Delete Clock Cycles menu. •These actions will open the Clock Alteration dialog in either insert or delete mode. •Enter the number of cycles to insert or delete. |
|
•The Selected Clock Only radio button causes only the edges of the selected clock to move. •The Clock Associated Signals radio button causes the edges of all signals using the selected clock as their clocking signal to move |
|
•The All Signals radio button causes the edges of all the signals in the diagram to move. |
|
